Hola tengo un VUSOLO2 clon y no se como cargarle las claves BISS. Tengo instalado OPENSPA 6.009
Tengo OSCAM EMU 11.274
Este es el formato que esta en mi constan.cw
2600:000000:0078:8190:1fff::13 71 13 00 37 11 13 00 13 71 13 00 37 11 13 00 ; Televisiete
2600:000000:0082:8190:1fff::13 71 13 00 37 11 13 00 13 71 13 00 37 11 13 00 ; Teleonce
No puedo hacer que funcionen los PODERBU
Tampoco puedo hacer que funcione las biss
Las que si funcionan son las TANBER.
El unico PODERBU que me funciona es el Antena 3 series (SIn Audio) y funciona sin STREAMRELAY
Los otros no funcionan ni con STREAM y mucho menos directos.
No hablemos de Autoroll pues seria de risa.
Los archivos SoFcam.Key y Constant.cw estan en VAR/KEYS y tambien coloque una copia en ETC/TUXBOX/CONFIG
Tengo funcionando el sat 70W sin problemas.


Les anoto mi archivo OSCAM. Conf


# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11075
# Read more:

[global]
logfile = /var/log/oscam.log
#logfile = stdout
nice = -1
preferlocalcards = 1

[cache]

[streamrelay]
stream_relay_enabled = 750

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 16402
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
http_status_log = 1





Y este es mi archivo OSCAM:SERVER


[reader]
label = oscam_emu
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;09 0F:000000; 0500:000000,030B00,023800,021110,007400,007800;180 1:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0 E00:000000 ;4AE1:000000
group = 1

[reader]
label = SoftCam.Key
protocol = constcw
device = /etc/tuxbox/config/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;09 0F:000000; 0500:000000,030B00,023800,021110,007400,007800;180 1:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0 E00:000000 ;4AE1:000000
group = 2

[reader]
label = constant.cw
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;09 0F:000000; 0500:000000,030B00,023800,021110,007400,007800;180 1:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0 E00:000000 ;4AE1:000000
group = 3

[reader]
label = oscam.keys
protocol = constcw
device = /etc/tuxbox/config/oscam.keys
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;09 0F:000000; 0500:000000,030B00,023800,021110,007400,007800;180 1:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0 E00:000000 ;4AE1:000000
group = 4

[reader]
label = oscam.constant.cw
protocol = constcw
device = /etc/tuxbox/config/oscam.constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;09 0F:000000; 0500:000000,030B00,023800,021110,007400,007800;180 1:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0 E00:000000 ;4AE1:000000
group = 5

[reader]
label = CCcam
description = CCcam
protocol = cccam
device = server,port
user = username
password = password
group = 1
cccversion = 2.1.4

# "AQUI PONGO LOS DATOS DE MI USER DEL 70W"
[reader]
label = Newcamd
description = Newcamd
protocol = newcamd
device = xxxxxxxxxxxxxxx,xxxxx
key = 0102030405060708091011121314
user = xxxxxxxx
password = xxxxxxxxx
group = 1

[reader]
label = Camd3
protocol = camd35
device = server,port
user = user
password = pass
group = 1

Su ayuda para poner a funcionar PODERBU y BISS
Muchas Gracias.